Stabilizer flat bar 31-1/2 inch center hole to center hole for Cat I 7/8 inch pins

Stabilizer flat bar 33 inch center hole to center hole for Cat I 7/8 inch pins

Stabilizer chain 32 inch at middle adjustment adjustable with 3/4 inch clevis pin and 7/8 inch eyebolt hole

Stabilizer round adjust 27-1/2 inch to 37 inch with 7/8 inch hole for Cat I

Stabilizer pin with 2-1/2 inch overall length, 7/8 inch diameter, 1/4 inch useable length, 1-1/4 inch thread length, 5/8 inch thread size, 5/8 inch-18 nut size. Replaces 230044WNL

Stabilizer pin with 3 inch overall length, 7/8 inch diameter, 1 inch useable length, 1-3/16 inch thread length, 5/8 inch thread size, 5/8 inch-18 nut size. Replaces 141185WML

Stabilizer bar adjustable from 24-1/2 TO 35-1/2 inches with 5/8 inch clevis pin hole next to tractor and 7/8 inch hole for imp end.

Stabilizer pin for under axle bracket with 3/4 inch NF tapered nut

Stabilizer end for 539881M2 stabilizer tube 1 inch NF

Stabilizer jam nut 1 inch NF for 523978M3P end

Clevis with 5/8 inch pin hole use with 521006M1 shoulder bolt

RH Stabilizer bracket for models 253, 263, 283, 362, 365, 375, 383, 390, 390T, 393, 396, 398 & early model 399 Bolt pattern 7 X 1-5/8 inch center hole to center hole for 7/8 inch Diameter bolts

LH Stabilizer bracket for models 253, 263, 283, 362, 365, 375, 383, 390, 390T, 393, 396, 398 & early model 399 Bolt pattern 7 X 1-5/8 inch center hole to center hole for 7/8 inch Diameter bolts